English French German Italian Portuguese Spanish Swedish

 

CALL FOR VIDEO SUGGESTIONS

  • DHeal
  • DHeal's Avatar
  • Away
  • Expert Boarder
  • Expert Boarder
More
2 years 3 months ago #14883 by DHeal
Replied by DHeal on topic CALL FOR VIDEO SUGGESTIONS
Need video on 912 sprag clutch trouble-shooting and replacement.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #14884 by mpurvis
Replied by mpurvis on topic CALL FOR VIDEO SUGGESTIONS
a video showing the various effects of leaded fuel and the necessary increase in oil changes. In particular the effect on the turbo waste gate jamming and sprag clutch failures and highlighting the early signs of failure. I know of one instance of the waste gate jammed shut due to lead buildup and the over boosting of the engine requiring a complete rebuild.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #14889 by Rotax jack
Replied by Rotax jack on topic CALL FOR VIDEO SUGGESTIONS
I suggest a video on the detailed connections between a Rotax 912 ULS and a Garmin G3X Touch system.
Thank You.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #14890 by GlenN199LL
Replied by GlenN199LL on topic CALL FOR VIDEO SUGGESTIONS
Trouble shooting igniton system fot 912's. From the stator to the modules to the spark plugs.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
2 years 3 months ago #14893 by phb4885
Replied by phb4885 on topic CALL FOR VIDEO SUGGESTIONS
Suggest wrapping over top exhaust with asbestos exhaust wrap to protect ignition modules and any soft components under them. Wrap then secure with safety wire and spray with silver high heat paint for best results.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

  • admin
  • admin's Avatar Topic Author
  • Offline
  • Administrator
  • Administrator
More
1 year 3 months ago #17710 by admin
Replied by admin on topic CALL FOR VIDEO SUGGESTIONS
Reminder: our incredible AvMAP Giveaway promo ends in 30 days. Suggest a topic for a new Rotax-Owner video before the end of this year and receive an additional ten entries into the draw for our 2017 mega prize pack, which includes an AvMAP UltraEFIS, an AvMAP Engibox, and a sensor kit to suit the winner's engine!

This image is hidden for guests.
Please log in or register to see it.


( See this page for details )

Note: you must have a Rotax-Owner paid subscription in good standing to participate in this contest. Every subscription purchase this year automatically receives one draw entry. Extending your already-valid subscription before the end of 2017 ("renewing early") will yield you an extra draw entry.

Please Log in or Create an account to join the conversation.

  • DHeal
  • DHeal's Avatar
  • Away
  • Expert Boarder
  • Expert Boarder
More
1 year 3 months ago #17712 by DHeal
Replied by DHeal on topic CALL FOR VIDEO SUGGESTIONS
How about a video re: changing a worn/damaged sprag clutch?
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #17717 by francoralli
Replied by francoralli on topic CALL FOR VIDEO SUGGESTIONS
What are the operational limits of engine oil and water coolant temperatures and how can we maintain them within the operational limits? Especially during the cold seasons and while climbing when the temperatures raise.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #17718 by Rotax jack
Replied by Rotax jack on topic CALL FOR VIDEO SUGGESTIONS
I recommend a video on how to make the connections to an engine monitoring system such as the Garmin G3X EIS, Including the sensors used, the recommended routing of wires around the engine, protection of wires from heat and fuel, etc.
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #17800 by skymic
Replied by skymic on topic CALL FOR VIDEO SUGGESTIONS
Hi!
How about a video on How to convert from your Traditional round Rotax engine instruments to modern EMS like the Avmap EngiBox.
Both panel and what has to be change in the engine.

Cheers
Michael Scander
The following user(s) said Thank You: admin

Please Log in or Create an account to join the conversation.

  • Thierry Pradines
  • Thierry Pradines's Avatar
  • Away
  • Fresh Boarder
  • Fresh Boarder
More
2 weeks 4 days ago #21999 by Thierry Pradines
Replied by Thierry Pradines on topic CALL FOR VIDEO SUGGESTIONS
I would be much interested by a video showing HOW TO TEST THE STATOR on a 582.


Stator is a key part of the ignition system , and it is often a source of faimlure which is difficult to identify. It would be very helpfull to be able to detect a failure of this element.........and of course, the pending video would be " How to change a stator" ( removing the old one , and setting up the ne one ) !!!!
The following user(s) said Thank You: admin, RTX

Please Log in or Create an account to join the conversation.