English French German Italian Portuguese Spanish Swedish

rotax brp

 

Rotax 912 carburetor maintenance/cleanig bing 64

  • Gérard NOMMER
  • Gérard NOMMER's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
More
5 years 9 months ago #3346 by Gérard NOMMER
Gérard NOMMER created the topic: Rotax 912 carburetor maintenance/cleanig bing 64
Hello
Please, can you describe me the recommended preventive maintenance/cleaning to do every month or two month depending on the flight frequency?
How often I have to do the carburetor synchronization?
Thanks
Gerard

Please Log in or Create an account to join the conversation.

More
5 years 9 months ago #3347 by bill martin
bill martin replied the topic: Re: Rotax 912 carburetor maintenance/cleanig bing 64
Gerard,

Best place for this information is to go to the top of the page and click on the support tab, then the manual tab, then the 912 line maintenance manual. It describes all of the scheduled and unscheduled maintenance checks and how to do them.

Unless you are having a problem, disassembling the carbs is done every 200 hrs. or two years, whichever comes first. There is an annual or 100 hr check which does not require disassembly of carbs. Rubber parts should be replaced every five years regardless of hours.

Synchronization should be done at 100 hrs. or annually. I usually synchronize mine a couple of times a year but that's just a matter of personal preference.

Bill.
The following user(s) said Thank You: Wang Shu

Please Log in or Create an account to join the conversation.

More
1 week 6 days ago #18007 by Wang Shu
Wang Shu replied the topic: Rotax 912 carburetor maintenance/cleanig bing 64
kindly list down the rubber parts from carburetor that required tobe change after 05 years of time? like o.ring, diafram, float

Please Log in or Create an account to join the conversation.

More
1 week 6 days ago #18012 by Rob Seaton
Rob Seaton replied the topic: Rotax 912 carburetor maintenance/cleanig bing 64
See the rubber replacement list in the 912 Line Maintenance Manual chapter 05-10-00 section 2.1 page 8
The following user(s) said Thank You: Wang Shu

Please Log in or Create an account to join the conversation.

More
1 week 6 days ago #18015 by Wang Shu
Wang Shu replied the topic: Rotax 912 carburetor maintenance/cleanig bing 64
Thanksgiving.MR.ROB SEATON,
O.RING inside the carburetor is not mentioned.
so please guide me about o.ring inside the carburetor replacement?

Please Log in or Create an account to join the conversation.

More
1 week 5 days ago #18017 by Rob Seaton
Rob Seaton replied the topic: Rotax 912 carburetor maintenance/cleanig bing 64
Correct, o-rings are not on the list. if it is not on the list it does not have to be replaced.
The o-rings are replaced at the 200 hour carb inspection.

Please Log in or Create an account to join the conversation.