just bought an avid mark 4 and with a 582 and want to start fresh replacing all the hoses(fuel/oil/coolant). Not sure when the previous owner did them. Looking up the hoses on the rotax parts catalog the prices are $$$. Any advice on alternate hoses. Does anyone of a list of sizes/lengths etc
Thanks,
Alan
by Glenn James Dean » 3 weeks ago
Suitable replacements all found at your local auto store. Napa, Supercheap etc. Just takes a bit of searching or some small triming to size. Big saving.
No specific details as it will depend on your configuration.
by alan mekler » 3 weeks ago
so should I remove them and take them to NAPA?
Alan
by Glenn James Dean » 3 weeks ago
Yes. That is best. Need to change coolant anyway, so drain and discard that. Take all hoses with you and just match them up visually.
by Glenn James Dean » 3 weeks ago
While your at it. Fuel hoses likely need doing too. That is just standard auto 3/8 fuel hose. So all those little lengths on the fuel pump, carb, rotary valve etc can be cut to length. Just buy several feet off the roll.
|
To receive critical-to-safety information on your ROTAX Engine, please subscribe to |
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
You have declined cookies. This decision can be reversed.
You have allowed cookies to be placed on your computer. This decision can be reversed.
This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.
