Login

oil plug (banjo bolt)

by Joseph Skouras in 912 / 914 Technical Questions 10 years ago

Page 2 of 2

Start
Prev
1
2
Next
End

Re: oil plug (banjo bolt)

by bill martin » 10 years ago

bill martin

10 757 0

Joseph,

Take Mark's advice and watch the videos. If they are not available to you, click the support tab at the top of the page and go to the line maintenance manual. It will tell you exactly what to do. Oil change is no big deal, only caution i can think of is to NEVER rotate the prop backwards and NEVER rotate the prop with the oil tank empty or the filter off.

Bill.

Report
Re: oil plug (banjo bolt)

by Roger Lee » 10 years ago

Roger Lee

126 5.13k 4.56k

There is more than one for you. Watch all the oil videos on this page.

http://www.rotax-owner.com/videos-topmenu/expanded-video-instructions

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

Page 2 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
replacing coil HT wire	912 / 914 Technical Questions	1
Ring mount, rad, oil cooler	Parts	1
914 Oil Seepage From Airbox Intake Tube	912 / 914 Technical Questions	8
New vs Old - Oil Pressure Sender	912 / 914 Technical Questions	1
OIL TEMP RISE AT MCP	915iS Technical Questions	0

Top

© Rotax-Owner.com

Login