fbpx

 

  • Re: 912 ignition modules

    by » 8 years ago


    the ASM was introduced Aug 2009 on the 100hp
    It was standardized on all 912/912S & 914 engines in Jan 2014.

    Thank you said by: Roger Lee

  • Re: 912 ignition modules

    by » 8 years ago


    Thanks Rob.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell


  • Re: 912 ignition modules

    by » 4 months ago


    Roger Lee wrote:
    I don't remember the date when the engine's switched to the new soft start modules, but after that time all engines come with them.

    Rob can probably remember better than I can when the new modules were going on engines from the factory.

    I just had to replace engine with a newer model uls

    This one looks like it has the soft start built in but no one on this subject mentioned the extra wiring kit.

    Do I have to order it?

     


  • Re: 912 ignition modules

    by » 4 months ago


    If you need the two wires from the modules that go to the starter solenoid then you can use your own wire and just buy from a Rotax service center the metal connectors the plug into the modules plastic plugs. The other end you can use your own spade connector. This procedure is fairly easy to do. Very straight forward.


    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell


You do not have permissions to reply to this topic.