Login

912 leak oil from cyl 2

by Przemysław Wiśniewski in 912 / 914 Technical Questions 9 years ago

Page 2 of 2

Start
Prev
1
2
Next
End

Re: 912 leak oil from cyl 2

by Roger Lee » 9 years ago

Roger Lee

126 5.13k 4.53k

Have you ruled out a crack in the cylinder and replaced the nut and torqued the new nut? If you have a crack nothing will fix it except replacement. If it is solely a leak then a new nut and torquing it may fix it. If not you can try this.

You can try a little Loctite 5910 (Loctite 598, US equivalent) on the threads and or the nut seating surface. Remember that the torque is now not a dry torque, but needs adjustment for a wet torque. It will be less.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: 912 leak oil from cyl 2

by Przemysław Wiśniewski » 9 years ago

Przemysław Wiśniewski

65 247 3

Hi. I'm still waiting for parts from rotax so maybe I'll order also o-rings...
I'll use also Loctite 5910, I have it after gearbox replacement.

Report

Page 2 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Need to find 912iS Fuel Filter	General Tech Discussion	8
Blended 100LL/Unleaded Fuel & Oil Change Interval	912iS Technical Questions	2
pin cramp for ignition 912	912 / 914 Technical Questions	3
Garmin sensor kit for Rotax 912/915 iS	915iS Technical Questions	3
912iS Dual Flashing Lane Light at Startup	912iS Technical Questions	8

Top

© Rotax-Owner.com

Login