Oil leak

by Sean Du Toit in 912 / 914 Technical Questions 8 years ago

I have a 914T installed in an Explorer, similar to a Kit Fox. I am getting small oil deposits on my Left wheel spat and strut. Orginally thought it was coming from the oil breather pipe. Had a closer look and have small deposits infront of the lip on the cowling. Looks like it is possible coming from the exhaust. I have no oil usage between oil changes. Any ideas?

Re: Oil leak

by Rob Seaton » 8 years ago

Rob Seaton

3 1.32k 240

Start the engine and then shut it off, check inside the exhaust pipe with your finger: it is oily?
If not, you need to trace the source of the leak; remove the cowls, clean the engine and run it for a short time and look for the source. It may just be residual from your last oil change.Often you will see oil on #2 cylinder fins and valve cover; that is residual from the oil filter change (engine in tractor configuration)

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
How to Remove Outlet Line from Turbo Oil Sump	912 / 914 Technical Questions	2
Blended 100LL/Unleaded Fuel & Oil Change Interval	912iS Technical Questions	2
replacing coil HT wire	912 / 914 Technical Questions	1
Ring mount, rad, oil cooler, rectifier	Parts	1
914 Oil Seepage From Airbox Intake Tube	912 / 914 Technical Questions	8

Oil leak

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login