Login

912 uls ignition module

by tom oatman in 912 / 914 Technical Questions 8 years ago

Page 2 of 2

Start
Prev
1
2
Next
End

Re: 912 uls ignition module

by Roger Lee » 8 years ago

Roger Lee

126 5.13k 4.58k

Hi Tom,

You'll have to ask the service center you bought it from about return policies. Once used you'll own it. maybe if it isn't opened you could ship off your modules and have them tested for a definitive answer. If they test good then the other one has not been opened and maybe they'll take it back? That you'll have to ask them.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: 912 uls ignition module

by tom oatman » 8 years ago

tom oatman

5 28 0

I hope to have the new module installed next week, I will report on my success or otherwise.

Report
Re: 912 uls ignition module

by tom oatman » 8 years ago

tom oatman

5 28 0

well, after a month and a half, I got the new ignition module installed, but no joy. problem still exists. next step is to diagnose the trigger coils on the crank. :(
anyone run across this before ?.

Report
Re: 912 uls ignition module

by tom oatman » 8 years ago

tom oatman

5 28 0

Well, after 2 months, the problem was diagnosed and fixed. the primary lead to the ignition coil had a broken wire, right inside the insulation. good detective work by a good rotax tech. saved me from buying a new coil. repair was made by soldering a splice, and sleeving it in shrink tubing.

Report

Page 2 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Garmin sensor kit for Rotax 912/915 iS	915iS Technical Questions	3
912iS Dual Flashing Lane Light at Startup	912iS Technical Questions	8
912 ULS setup in a KitFox II	912 / 914 Technical Questions	2
914UL Ignition Noise	912 / 914 Technical Questions	2
912iS Stator Failures	912iS Technical Questions	3

Top

© Rotax-Owner.com

Login