fbpx
Login

 

Jump to Forum..

Gear set for Rotax 912 Engine

in 912 / 914 Technical Questions 6 years ago

  • Re: Gear set for Rotax 912 Engine

    by » 6 years ago

    I opened the box and I have these attached photos. What is my gear box setting?
    Is it possible to determine which of the three PNs below do I have to acquire?

    886125 GEAR SET 2.27 narrow
    886517 GEAR SET 2.43 narrow
    886518 GEAR SET I 2.43 wide, 7 °

    Thank you for your help!
    IMG-20180921-WA0035.jpg (You do not have access to download this file.)
    IMG-20180921-WA0028.jpg (You do not have access to download this file.)
    IMG-20180921-WA0029.jpg (You do not have access to download this file.)
    IMG-20180921-WA0031.jpg (You do not have access to download this file.)
    IMG-20180921-WA0030.jpg (You do not have access to download this file.)
    IMG-20180921-WA0032.jpg (You do not have access to download this file.)
    IMG-20180921-WA0033.jpg (You do not have access to download this file.)
    IMG-20180921-WA0034.jpg (You do not have access to download this file.)
    IMG-20180921-WA0035_2018-09-21.jpg (You do not have access to download this file.)
    IMG-20180921-WA0031_2018-09-21.jpg (You do not have access to download this file.)
    IMG-20180921-WA0029_2018-09-21.jpg (You do not have access to download this file.)
    IMG-20180921-WA0030_2018-09-21.jpg (You do not have access to download this file.)
    IMG-20180921-WA0032_2018-09-21.jpg (You do not have access to download this file.)
    IMG-20180921-WA0033_2018-09-21.jpg (You do not have access to download this file.)
    IMG-20180921-WA0034_2018-09-21.jpg (You do not have access to download this file.)
      
    Report

  • Re: Gear set for Rotax 912 Engine

    by » 6 years ago

    What was the part number on the gear case housing?

    I count 50 teeth. 2.27 What did you get?
    2.27 wasn't made in the wide variation.

    You can confirm narrow by measuring the width of the gear.
    22mm (Just under 1") = Narrow
    27mm (Just Over 1") = Wide

    All of this can be found in the Parts manual.

    2.27 Narrow is still looking like the answer.
    - - - - - -

    Why do you think you need new gears?

    Bill Hertzel
    Rotax 912is
    North Ridgeville, OH, USA
    Clicking the "Thank You" is Always Appreciated by Everyone.

    Thank you said by: Marcos Paulo Vigliassi
      
    Report

  • Re: Gear set for Rotax 912 Engine

    by » 6 years ago

    The TBO of the engine was made and the bearing of the reduction box was changed. After that the engine is attrition and is not spinning freely the propeller (I'm not sure if these are the correct English terms).

    I thought the mechanic had changed the gears set and mounted it wrong, but I guess the problem was not that then.

    I do not know where the problem might be. :(

    Thank you for your help.
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
pin cramp for ignition 912 912 / 914 Technical Questions 3
Garmin sensor kit for Rotax 912/915 iS 915iS Technical Questions 3
912iS Dual Flashing Lane Light at Startup 912iS Technical Questions 8
engine miss mystery 912 / 914 Technical Questions 21
912 ULS setup in a KitFox II 912 / 914 Technical Questions 2
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

ROTALK News



ROTALK NEWS Episode 5
Rotax-powered Sling aircraft from The Aircraft Factory, the AVMAP Navigation and engine monitoring system, and the Rotax powered Tucano Experimental and Light-Sport Aircraft.



ROTALK NEWS Episode 4
ROTAX's 915iS-powered Aquila A211 test aircraft, the Scheibe SF-25C Falke (first-ever 912-equipped aircraft!) and ROTAX factory in Gunskirchen, Austria.


ROTALK NEWS Episode 3
Michael Smith's Rotax-Powered Searey Circumnavigation, the amazing Rotax-Powered Lockwood Aircam and Anthony Caere's chimpanzee rescue operations.

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login