fbpx

 

  • Re: SB 912 073 Circlips

    by » one year ago


    I did mine a little over a week ago ---- about 5 minutes per carburetor.

    - N O T -  Rocket Science

    Very Easy Peasy operation


  • Re: SB 912 073 Circlips

    by » one year ago


    CPS has them in stock

    5 minute operation per carb, but the possibility of having to resync exists (I removed only choke cable and air filters to access throttle body --- never touched the throttle cable, except for moving it aside.  Didn't change either idle or balance).   Just have to know what you are doing.

     


  • Re: SB 912 073 Circlips

    by » one year ago


    CPS has them in stock

    5 minute operation per carb, but the possibility of having to resync exists (I removed only choke cable and air filters to access throttle body --- never touched the throttle cable, except for moving it aside.  Didn't change either idle or balance).   Just have to know what you are doing.

     


  • Re: SB 912 073 Circlips

    by » one year ago


    CPS has the parts in stock.

    Change takes about 5 minutes per carburetor.

    Might take longer if you disturb the throttle cables and they aren't already mechanically marked for full idle.  Mine were marked, so I didn't have to re-adjust the idle nor rebalance the system (but I did check, and that added an additional 1/2 hour.)   (Relatively) easy replacement job


  • Re: SB 912 073 Circlips

    by » one year ago


    Hint:  Remove the nuts holding the lever arms of the throttle and choke from their respective shafts when accessing the throttle body.  When you re-assemble the carburetor, your balance and idle won't (shouldn't) be affected


You do not have permissions to reply to this topic.