Login

Fuel Filter Replacement

by Jim Flock in 912iS Technical Questions 6 years ago

Can a basic service level iRMT perform this task? Are there published instructions? I skimmed the manuals and was unable to find any.

Aviation Real Estate Specialist & iRMT

Re: Fuel Filter Replacement

by Roger Lee » 6 years ago

Roger Lee

125 5.11k 4.52k

You should be able to as it is covered in preventative maint. rules in the US. The FAA would control this and not Rotax. You may find something in the aircraft MFG maint. section of a manual like the maint. checklist that many times list who can do certain maint. procedures.

http://121five.com/admin/FeatureArticles/Owner%20Performed%20Aircraft%20Maintenance.pdf

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: Jim Flock

Report
Re: Fuel Filter Replacement

by Jim Flock » 6 years ago

Jim Flock

13 172 189

Thanks. Are there any torque values for the connectors?

Aviation Real Estate Specialist & iRMT

Report
Re: Fuel Filter Replacement

by Jim Flock » 6 years ago

Jim Flock

13 172 189

I'm sure every installation is different, but the official response from Tecnam on the 912iS filter is: "torque value should be about 15 N*m [ ± 2.5 N*m]"

Aviation Real Estate Specialist & iRMT

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Air Filter Sizing	912 / 914 Technical Questions	4
Fuel pump	General Tech Discussion	11
Max takeoff fuel consumption	915iS Technical Questions	2
Rubber Hose Replacement	912iS Technical Questions	10
Fuel pump	912 / 914 Technical Questions	1

Top

© Rotax-Owner.com

Login