912IS—One of the cables from my #2 ignition coil to the spark plug is routed poorly. How do I remove the cable from the ignition coil without damaging anything?



9831_1_IMG_1159.jpeg (You do not have access to download this file.)
  • Re: Ignition Coil Connector

    by » 12 months ago

    Unscrew the rubber plug cap and re-rout ir. Then trim about 3/8" off the end of the plug cap wire to get some fresh internal wire, place a dab of dielectric grease on the tip of the wire and screw the plug cap back on until it stops.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

You do not have permissions to reply to this topic.