Hi All,

This won't apply to a lot of people, but the owners that have a Dynon D120 EMS that has the oil temp fluctuation it will fix that little bug. Here is a program from Dynon that can be loaded just like the normal Dynon software updates. Once uploaded to the D120 go into setup, then sensors, then toggle down to the oil temp and select. Then when open on the oil temp toggle down to the sensor type and toggle to you get #11. Now just exit. The oil temp should now be fairly rock steady.

It is in a ZIP file so download it and extract it to your laptop to upload to the Dynon D120. If you have any problems let me know. I have been using it for 2-3 months and it works well.
D120_SENSOR_SUPPORT.zip (You do not have access to download this file.)

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

You do not have permissions to reply to this topic.