fbpx
Login

 

Jump to Forum..

Rotax engine stand

in General Tech Discussion 10 years ago
I recently came upon this on another forum. Someones idea of an engine stand.

I would really like some comments.

Rob,
What do you think?
image-1.jpeg (You do not have access to download this file.)

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

  • Re: Rotax engine stand

    by » 10 years ago

    What does the FACTORY think?
      
    Report

  • Re: Rotax engine stand

    by » 10 years ago

    I think it is a throw-back to someone's conti and lyc days. Not ideal for working on the gearbox!
      
    Report

  • Re: Rotax engine stand

    by » 10 years ago

    My thoughts were it may tweak the prop flange because the engine has enough mass if pushed over a tad, possibly damage the oil seal and or bearing leaning to much one way and maybe putting some of the factory residual oil where you may not want it. The last one may be a stretch, I just don't know.
    I have never seen anyone do this to a Rotax or even heard of such a thing.


    Other comments or ideas?

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Rotax engine stand

    by » 10 years ago

    Here is another I found. I just don't get it.
    engine_stand_2.jpg (You do not have access to download this file.)

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Rotax engine stand

    by » 10 years ago

    The ones done in A&P school or other places were most likely direct drive engines like Cont. & Lycoming and they didn't have a gearbox.

    The gearbox is a major game changer.

    Here is the comment from high up in the Rotax chain.

    "Both are bad news for the engine. Let is remember that this is not a
    direct drive, the weight and all the forces are not in direct line with
    the crankshaft, it is offset to because of the gearbox.

    This type of mounting is common on direct drive engines and should be
    avoided on geared engines for this reason. The worst is the one were the
    engine is flat and all the mechanical leverage on the prop flange could
    perhaps cause a real problem with the bending or fractures of the inner
    bearing retaining bolts."


    Bottom line don't do it and don't treat a Rotax like a Cont. or Lycoming. Number one mistake by A&P's working on a Rotax. Fixing A&P work on a Rotax is approximately 30% of my business because they either treat them like a Cont. or Lycoming or have no idea about LSA regs.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
How I Look up a FORM TRACKING NUMBER for an engine can is true or fake? 912 / 914 Technical Questions 0
Understanding the Different Versions of ROTAX Engines. 915iS Technical Questions 0
engine identification question General Tech Discussion 4
Rotax exhaust white grayish soot? General Tech Discussion 2
Service Instruction – PAC SI-PAC-028 “Optional cooling air baffle for ROTAX® Aircraft Engines General Tech Discussion 3
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

ROTALK News



ROTALK NEWS Episode 5
Rotax-powered Sling aircraft from The Aircraft Factory, the AVMAP Navigation and engine monitoring system, and the Rotax powered Tucano Experimental and Light-Sport Aircraft.



ROTALK NEWS Episode 4
ROTAX's 915iS-powered Aquila A211 test aircraft, the Scheibe SF-25C Falke (first-ever 912-equipped aircraft!) and ROTAX factory in Gunskirchen, Austria.


ROTALK NEWS Episode 3
Michael Smith's Rotax-Powered Searey Circumnavigation, the amazing Rotax-Powered Lockwood Aircam and Anthony Caere's chimpanzee rescue operations.

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login