912 oil tank return line

by Miles Hryniuk in General Tech Discussion 6 years ago

I have cracked the return line to the oil tank on my 912. I got new hose and can't get it over the flare on the tubes. Does anyone know if there is a tool to slip them over or a special trick to get it on?

Re: 912 oil tank return line

by Roger Lee » 6 years ago

Roger Lee

125 5.11k 4.52k

If you can’t slide a new hose over the flared end of the oil tank fitting then the hose is too small. It should be 13mm (1/2”), You may have this size and it may be the wrong type of hose. If this is the case get a different hose type.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: Miles Hryniuk

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
pin cramp for ignition 912	912 / 914 Technical Questions	1
Garmin sensor kit for Rotax 912/915 iS	915iS Technical Questions	3
912iS Dual Flashing Lane Light at Startup	912iS Technical Questions	1
912 ULS setup in a KitFox II	912 / 914 Technical Questions	2
replacing coil HT wire	912 / 914 Technical Questions	1

912 oil tank return line

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login