air filters

by Jed Woodward in 912 / 914 Technical Questions 10 years ago

Are 2 in filters adequate for 100 Hp 912 or does one need the 7 in filter. Had a pair of the 7 in ones and both tore at the carb mount on a kitfox 4. Any advice appreciated

Re: air filters

by bill martin » 10 years ago

bill martin

10 757 0

Jed,

I use the flat filters on my 912S. By flat, I mean it is about 7" dia. and 2" thick. There is no room for a long filter between my carbs and the firewall. Any of the filters rotax makes for the 912 will work equally well as far as airflow is concerned.

I would guess that from an engineering standpoint, a long filter would be more subject to vibration flexing at the carb joint due to its longer moment arm. A short, fat filter would weigh just as much but be less likely to fail at the carb joint. That's just a guess because I've actually never seen an air filter fail. Short, long, conical, or otherwise, the shape won't matter as long as you have adequate square inches of filter area.

Bill.

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Leading edge airfoils is sold	General Tech Discussion	6
Washed airplane, now have a generator issue	General Tech Discussion	8
Air Filter Sizing	912 / 914 Technical Questions	4
914 Oil Seepage From Airbox Intake Tube	912 / 914 Technical Questions	8
914 Turbo Induction/Air Intake Hose	912 / 914 Technical Questions	1

air filters

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login