Login

Prop strike 912 ULS

by Jim Johns in 912 / 914 Technical Questions 10 years ago

What is the proper procedure on a Rotax 912 after a prop strike with a wooden propeller?

Thanks for any info or links.

N1cavu

Re: Prop strike 912 ULS

by Roger Lee » 10 years ago

Roger Lee

125 5.12k 4.53k

Hi Jim,

There is a series of checks to perform for a prop strike. Look in the Heavy Maint. manual in section 72-00-00 and start at 3.9. This should help. Contributing factors are what rpm was it turning, what did it hit, what type of prop and how much was damaged on the prop (i.e. just 1" of the tips or ground down to the hub. You may not have the tools or training and may need to send the gearbox to a maint. facility.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: Jim Johns

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Need to find 912iS Fuel Filter	General Tech Discussion	0
Need to find 912iS Fuel Filter	General Tech Discussion	8
pin cramp for ignition 912	912 / 914 Technical Questions	3
Garmin sensor kit for Rotax 912/915 iS	915iS Technical Questions	3
912iS Dual Flashing Lane Light at Startup	912iS Technical Questions	8

Top

© Rotax-Owner.com

Login