Oil Pressure Missing on FLYdat
in 912 / 914 Technical Questions
9 years ago
Respected Friends,
We are using FlyDat Part Number 886857 (new) right out of the box with Rotax 912 ULS equipped with HoneyWell Oil Pressure sensor Part Number 956413.
Problem is we have not been able to get any oil pressure reading on the Flydat after wiring up everything.
we have two wires coming out of the honeywell sender (red and white). We are using the white wire for sensor (pin# 13) and red wire for ground (pin# 14).
Point to note is the engine was bought in 2009 and was in storage since then. It was taken out of the box in March 2014 for installation and since then we are stuck with no oil pressure. The engine starts fine but we have limited the start time to max of 15-20 Sec.
hope someone can help!!!!
We are using FlyDat Part Number 886857 (new) right out of the box with Rotax 912 ULS equipped with HoneyWell Oil Pressure sensor Part Number 956413.
Problem is we have not been able to get any oil pressure reading on the Flydat after wiring up everything.
we have two wires coming out of the honeywell sender (red and white). We are using the white wire for sensor (pin# 13) and red wire for ground (pin# 14).
Point to note is the engine was bought in 2009 and was in storage since then. It was taken out of the box in March 2014 for installation and since then we are stuck with no oil pressure. The engine starts fine but we have limited the start time to max of 15-20 Sec.
hope someone can help!!!!
