Login

Ignition

by Ian Cooper in 912 / 914 Technical Questions 9 years ago

Page 2 of 2

Start
Prev
1
2
Next
End

Re: Ignition

by Roger Lee » 9 years ago

Roger Lee

126 5.13k 4.56k

Hi Jay,

I would turn the mixture screws back to 1.5 turns.

I think your problem either lies in a switch or one of the white ground wires has a bad connection. Maybe the insulation rubbed through somewhere or the wire is pinched or broken just inside its connector. All places to look and trace every inch back to its source. Start at the switches.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Thank you said by: jay white

Report
Re: Ignition

by Ian Cooper » 9 years ago

Ian Cooper

3 3 0

Hi everyone. Thank you for the replies. Turns out just a poor earth. Everything ok again.

Report
Re: Ignition

by Roger Lee » 9 years ago

Roger Lee

126 5.13k 4.56k

Hi Ian,

Glad it worked out. The poor or disconnected ground can sure cause a lot of weird things and the first place I usually check.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

Page 2 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
912ULS Ignition Issue	912 / 914 Technical Questions	2
9912ULS Ignition Module Issue, maybe	912 / 914 Technical Questions	12
Ignition issue	General Tech Discussion	1
912ULS 966-727 vs 965-445 Ignition Module Question	912 / 914 Technical Questions	2
Ignition Coil Connector	912iS Technical Questions	1

Top

© Rotax-Owner.com

Login