fbpx
Login

 

Jump to Forum..

Charge Light Remaining On

in 912 / 914 Technical Questions 9 years ago
OK. Was finishing up annual on RANS S-12. Had oil spill over wiring. Engine on top in back...pusher. Regulator/Rectifier back there. I have not yet crawled back there to check if oil got into the R/R. Other wiring should not be effected.

Ran engine and now I'm getting constant charge light with good charge on battery.

Suggestions?

  • Re: Charge Light Remaining On

    by » 9 years ago

    the charge warning lamp works by having both sides of the lamp connected to 12 volts. During normal engine operation they cancel each other out the lamp stays off. If the regulator stops putting out 12v it becomes a ground and the lamp illuminates.
    Pull the large black connector off the regulator and check that the "L" wire and the "C" wire are showing 12v (with the master on).

    This is assuming the aircraft is wired according to the standard Rotax drawing. Some aircraft use their own drawings.
    Make sure you truly are getting an output from the regulator; the battery voltage should increase from 12 volts to 13-14 volts when the engine is running. If you are only getting 12v then the battery is not being charged and you have a regulator or generator problem.
      
    Report

  • Re: Charge Light Remaining On

    by » 8 years ago

    Make sure electrical connectors inside are actually connected. You can slide the big plastic plug in, and actually push the metal connectors out the back. Also I had light come on on my s-14 with 912. Checked plug connections, and found plate regulator was bolted to was pop rivited to keel tube. It was very loose. Re-rivited and ran ground wire from regulator mount to a bolt on the engine. The regulator must be grounded. Hope this helps!
    IMG_20151108_120842578.jpg (You do not have access to download this file.)
    IMG_20151108_121006775.jpg (You do not have access to download this file.)
      
    Report

  • Re: Charge Light Remaining On

    by » 8 years ago

    Rob, that L & C wire check for 12v with master switch on, is that with engine running or engine off? I assume it is engine off.
      
    Report

  • Re: Charge Light Remaining On

    by » 8 years ago

    yes, engine off.
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
Battery Minder/Charger for 915iS 915iS Technical Questions 2
Battery Minder/Charger for 915iS 915iS Technical Questions 2
fuel pump light 915iS Technical Questions 0
912iS Dual Flashing Lane Light at Startup 912iS Technical Questions 9
Lane B Intermitent Light 915iS Technical Questions 4
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

ROTALK News



ROTALK NEWS Episode 5
Rotax-powered Sling aircraft from The Aircraft Factory, the AVMAP Navigation and engine monitoring system, and the Rotax powered Tucano Experimental and Light-Sport Aircraft.



ROTALK NEWS Episode 4
ROTAX's 915iS-powered Aquila A211 test aircraft, the Scheibe SF-25C Falke (first-ever 912-equipped aircraft!) and ROTAX factory in Gunskirchen, Austria.


ROTALK NEWS Episode 3
Michael Smith's Rotax-Powered Searey Circumnavigation, the amazing Rotax-Powered Lockwood Aircam and Anthony Caere's chimpanzee rescue operations.

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login