According to Rotax SI-912-02 R8 Section 79-00-00 1.2.1 the torque to be applied when installing the oil pressure sensor is "15 Nm (98 in.lb)", as stated in two separate places.
However, 15 Nm IS NOT 98 in.-lbs, it is 130 in-lbs (while 98 in-lbs is actually 11 Nm). As the original document was German, i.e., metric, the correct torque should be 130 in-lbs.
Sandy
However, 15 Nm IS NOT 98 in.-lbs, it is 130 in-lbs (while 98 in-lbs is actually 11 Nm). As the original document was German, i.e., metric, the correct torque should be 130 in-lbs.
Sandy
