fbpx

 

  • Re: Ignition module: 966721 compatible with 966726?

    by » 8 years ago


    You only need 2x complete sets.

    2 x plugs

    2x sockets

    2x plugs and sockets are already on the modules.

    That makes it even cheaper.

    Put the money you save towards the stainless steel bracket that supports the plugs.

  • Re: Ignition module: 966721 compatible with 966726?

    by » 8 years ago


    Dear Mark

    The time has come to install my ignition models. Your comment is a bit scary though. Just to make sure: You do know that there are two wiring diagrams for the 912 ULS, one for older models (mine is coded d04778 in the left hand bottom) and one for newer models (coded d05739). You didn't perhaps mix up those two and ended up with module damage?

    The problem is that I cannot copy the installation off my plane. I'm going to use an old module (966721) in place of a new model (966726).

    Blue skies
    Arthur

  • Re: Ignition module: 966721 compatible with 966726?

    by » 8 years ago


    Hi Arthur

    If you are wiring your modules and coils from a drawing, you must use the one I have posted.

    The Rotax one is incorrect and contradicts itself.

    If you cannot see the mistakes in the drawing or don't understand it, ask someone who does to do the wiring.

    Mark

You do not have permissions to reply to this topic.