fbpx

 

  • Re: Vibration

    by » 7 years ago


    If you are in a pinch call Bing direct. They are listed on the internet.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell


  • Re: Vibration

    by » 7 years ago


    You could try Rotech Research Canada for the carb floats.

  • Re: Vibration

    by » 7 years ago


    I encountered a vibration and found the propeller main shaft bearing and shaft destructing...
    Lockwood did the repair and couldn't be happier....I went through carb rebuild and syncing
    ignition cables, which were due anyway. What a headache....

  • Re: Vibration

    by » 7 years ago


    Thanks Mike. My problem seems to be multifactorial. I've had the gearbox removed and checked. Needed significant shimming, which helped. I also had the mechanic from Leading Edge who worked on my gearbox perform a carb synch, which helped a bit more. Floats were fine, and prop blade pitch is within 0.1 degree of each other. My next step is a dynamic prop balance. Making progress....

  • Re: Vibration

    by » 7 years ago


    Dynamic balancing the propeller is a must and results in a smoother running engine saving wear and tear on engine components.

You do not have permissions to reply to this topic.