Oil leak

by Mossie Oosthuizen in 912 / 914 Technical Questions 7 years ago

I have a 914 Dynaero MCR4 S that has an oil leak on top of the oil can. I replaced all the oil pipes and hose clamps, new rubber O-Ring for the oil tank and tightened the tension on the expandable ring but still get oil deposits on top of the oil tank.
Can anyone please advise who had the same problem.

Regards

Mossie Oosthuizen

Re: Oil leak

by Roger Lee » 7 years ago

Roger Lee

126 5.13k 4.58k

Hi Mossie,

If you have done all this my best guess would be either one of the two fittings that connect the hose to the tank aren't tight enough or the oil is coming from somewhere else. Could it be blown back from some place else?

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Leading edge airfoils is sold	General Tech Discussion	6
Oil Pressure Relief Valve	912 / 914 Technical Questions	9
How to Remove Outlet Line from Turbo Oil Sump	912 / 914 Technical Questions	2
Blended 100LL/Unleaded Fuel & Oil Change Interval	912iS Technical Questions	2
replacing coil HT wire	912 / 914 Technical Questions	1

Oil leak

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login