Login

Vibration after pitch change

by matt purvis in 912 / 914 Technical Questions 7 years ago

Page 2 of 2

Start
Prev
1
2
Next
End

Re: Vibration after pitch change

by Roger Lee » 7 years ago

Roger Lee

125 5.12k 4.53k

Hi Matt,

.75 or 3/4 of a degree is a lot. Let us know how it turns out.

I have a Remos coming in this morning with a vibration issue. First things I'll check is prop blades and carb sync.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Vibration after pitch change

by matt purvis » 7 years ago

matt purvis

1 5 0

Hi Roger,

Got back yesterday and re checked pitch using digital level on phone. This confirmed one blade was out so i set the blade with the phone level and then confirmed using a method i found on the net.

http://pointsforpilots.blogspot.com.au/2013/02/setting-blade-pitch-for-sensenich.html.

I did this and now all is well. Thanks for the help and advice.

Report
Re: Vibration after pitch change

by Roger Lee » 7 years ago

Roger Lee

125 5.12k 4.53k

Hi Matt,

Glad it worked out.

I read that article. That's doing it the hard way, but hey if it works no problem.

Roger Lee
LSRM-A & Rotax Instructor & Rotax IRC
Tucson, AZ Ryan Airfield (KRYN)
520-349-7056 Cell

Report
Re: Vibration after pitch change

by julian van santen » 7 years ago

julian van santen

4 21 20

That's actually a great way (the article) to sync the two blades, I personally have a little issue with getting the digital protector method to be supper accurate

Report

Page 2 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Changing the propeller pitch	912 / 914 Technical Questions	6
Crush washer for oil change	915iS Technical Questions	7
vibrations	912 / 914 Technical Questions	33
Upgrading to silicone hoses at 5 year rubber change?	912iS Technical Questions	14
Think I need my prop repitched. Any suggestions?	General Tech Discussion	13

Top

© Rotax-Owner.com

Login