I am changing my EFIS/EMS setup from my old TruTrak EFIS (which is dying ) to the latest GRT.

Unlike TruTrak, GRT only supports ring style CHT probes ( which they provide with the EMS Rotax package) Their documentation suggests to get rid of the old probe and replace it with a 10 mm 1.5 bolt and use the old probe to monitor coolant temperature.

I do not plan to monitor coolant at all so my question is - can I use the old probe basically as M10 bolt and just put the ring terminal under the old sensor ?

I don't happen to have a brass M10 1.5 on hand so that would be handy ..

Pretty much like on this picture ..



9628_1_CHT_Probe.jpg (You do not have access to download this file.)
You do not have permissions to reply to this topic.