fbpx
Login

 

Jump to Forum..

915 HIC Wiring Map / Pin Locations

in 915iS Technical Questions 6 hours ago

I am converting the rectangular HIC connectors to cannon plugs, as has been done with the 916's.  (I can answer questions as to why in a separate conversation).  

My question is...  Where can find the manual that defines the pin locations for the HIC connectors?  I documented the location of each wire with labels.  Unfortunately, 2 of the labels fell off on the HIC B connector.  So I have two wires (7 & 8) that need identified.  I have the 915 installation manual and do not see the diagram I need for the HIC connectors.

Thank you!

10996_1_Image 6-20-25 at 5.05 PM.jpeg (You do not have access to download this file.)

  • Re: 915 HIC Wiring Map / Pin Locations

    by » 5 hours ago

    After fighting with the stock connectors and trying to get the contacts inserted and having great difficulty, I finally cut off the stock connectors and switched to Deutsch DT and DTM connectors. I considered the round misspelled connectors, but they are much more expensive and much harder to use.  I used two of them for my firewall penetrations and after using those and then the Deutsch, the Deutsch win hands down.  They are easy for contact insertion and really easy for contact removal.

    The pin configuration is in the 915 installation manual.

      
    Report

  • Re: 915 HIC Wiring Map / Pin Locations

    by » 3 hours ago

    I should have mentioned that I have the 915 installation manual, but do not see the wiring diagram for the HIC connectors in it anywhere.

      
    Report

  • Re: 915 HIC Wiring Map / Pin Locations

    by » 3 hours ago

    hi Rob

    Look in section 77 of the installation manual.  Here are just a few pages to show you.  There are others. 

    Cheers

    42962_2_Hiic A section 77 page 5 installation .jpg (You do not have access to download this file.)
    42962_2_hic B section 77 installation .jpg (You do not have access to download this file.)
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
915 Purge after prop removal? 915iS Technical Questions 0
915 Generator Failed New Engine 915iS Technical Questions 11
HIC-A&B cable harness 915iS Technical Questions 0
HIC-A&B cable harness 915iS Technical Questions 1
at which rpm needle jet begin to raise? what are signs of clogged bypass holes? 912 / 914 Technical Questions 2
Follow Us

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

Recent Videos

Login