HIC A and B Engine connector

by Brinsley Manzi in 912iS Technical Questions 7 years ago

This really is a basic school boy question but one that has confused me a little so I apologize in advance. When looking at the wiring schematic for connection on to the 912is HIC A and B is the picture of the plug looking from behind where the pins push in or is it a view from inside where the pins come out by the white TPA plate. I really cant work it out from the diagram
Many thanks
Brinzlee

Page 1 of 2

Start
Prev
1
2
Next
End

Re: HIC A and B Engine connector

by RotaxOwner Admin » 7 years ago

RotaxOwner Admin

59 1.58k 13.8k

Which diagram are you looking at, exactly? (document & page number...)

Report
Re: HIC A and B Engine connector

by Brinsley Manzi » 7 years ago

Brinsley Manzi

1 3 0

Hi
I'm looking at the Rotax installation manual
5.3) Wiring Diagram
Installation wiring diagram 24-00-00 page 28
Thanks

Report
Re: HIC A and B Engine connector

by Rob Seaton » 7 years ago

Rob Seaton

3 1.32k 240

That drawing shows the TPA plate side (not wire side)
the HIC connectors supplied in the "connector kit" have the pin numbers on the corners.
The HIC connectors on the engine harness have each pin number on the wire entry side.

HICnumbering_2017-01-31.JPG (You do not have access to download this file.)

Thank you said by: Brinsley Manzi

Report
Re: HIC A and B Engine connector

by Brinsley Manzi » 7 years ago

Brinsley Manzi

1 3 0

Thanks Rob for your help. I did check and I am fairly sure there are no numbers on the connector kit that I was supplied with but I will recheck. Could I be very cheeky and ask for another photo of the HIC connector but just very slightly further out so that I can see the lugs on the outside of the body....this will further help me with its orientation.
Kind regards
Brinsley

Report
Re: HIC A and B Engine connector

by Rob Seaton » 7 years ago

Rob Seaton

3 1.32k 240

pinnumbers_2017-02-01.JPG (You do not have access to download this file.)

Report

Page 1 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Title	Category	Replies
engine miss mystery	912 / 914 Technical Questions	21
Wanted WTB Twin Engine Manifold Pressure Gauge	Parts	0
Dash mounted engine management products.	General Tech Discussion	2
RPM issue, first start, new engine	912 / 914 Technical Questions	8
Expiration date of my engine	912 / 914 Technical Questions	4

HIC A and B Engine connector

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login