fbpx

 

  • Re: Dynon Skyview & 912is

    by » 10 months ago


    Thanks for your reply. 

    I have the Explorer of MGL with flow meter but I didn't found the function that calculates the amount of fuel used. 


  • Re: Dynon Skyview & 912is

    by » 10 months ago


    I have a skyview with a 912 iS and i fitted red cubes. I now use the inbuilt ECU fuel flow figures since i need that figure to manage power with a constant speed prop running lean of peak (eco mode - power is a function of fuel flow not MAP) I haven't bothered to finally calibrate the red cubes and they are too slow to react compared to the CAN bus figure. I'm removing the red cubes during the annual.

     

    I'm told that the CAN bus figure is accurate to within a few percent and that has been my experience - anyway, I always work on at least a 10% tolerance which for me is +- 11 litres because I don't believe I can accurately plan better than that anyway so the CAN bus figure is fine. Anything more accurate would be overkill.

     

     


  • Re: Dynon Skyview & 912is

    by » 7 months ago


    Hi Geoff,

    So how do i set up the system in the skyview, is there any chance you have a basic walkthrough to help me set up the skyview to enable the virtual fuel gauge.

    Kind regards

    G


You do not have permissions to reply to this topic.