fbpx

 

Hi all,

I am flying gyroplane with 915 iS . Engine has 50 hours and no issues so far.

On my last 3 flights, I had Lane A light ON,  on identical way. I was doing touch and go's and after  around 50 minutes of flying, after 5 or 6 of them, while I am about to touch down with engine idling at around 1950 rpm, land A lamp comes ON. Each time I made full stop (although I was planning to fly more), reset the lane on the ground (all good), continue taxing and shut down the engine. As I said, this scenario happened 3 times in exactly this sequence. Data from ECU are in attachment. I have BUDS level one and I am not able to clear the logs.

Any help would be greatly appreciated.

Dejan

  • Re: Lane A light ON while engine idling just before touch down

    by » 4 months ago


    here is attachment

    32255_2_195031_LaneA_300_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_302_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_303_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_304_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_305_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_307_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_308_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_314_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_315_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_317_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_318_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_326_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_331_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_336_1.csv (You do not have access to download this file.)
    32255_2_195031_LaneA_337_1.csv (You do not have access to download this file.)

You do not have permissions to reply to this topic.