Login

Regulator/Rectifier

by Robert J. Dean in General Tech Discussion 7 years ago

Page 3 of 3

Start
Prev
1
2
3
Next
End

Re: Regulator/Rectifier

by James » 7 years ago

James

0 7 0

Mike, those are good points on possible causes of issues based on condition and way they manufactured.

Report
Re: Regulator/Rectifier

by ERNEST BITTEN » 7 years ago

ERNEST BITTEN

7 37 78

REMOS dumped the Ducati and switched to the SCHICKE GR-6 regulator.

Report
Re: Regulator/Rectifier

by John Wilfley » 7 years ago

John Wilfley

8 23 29

I had a problem with my G pin connector melting and it was the Ducati brand , it was the only thing installed prior to me purchasing the plane. in the log the regulator was replaced.
because I had voltage issues that was the first place I traced it and looked for a problem.
sure enough it's hard to see pushing that plastic clip up in place upside down on the back of the firewall,, so it bent one of the female tabs Creating a loose fit, and it was a bad connection arcing. A replacement went in and so far so good. I have pictures but can't upload them. I was a bit surprised at the size of those to yellow wires?

Report

Page 3 of 3

Start
Prev
1
2
3
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Replacement connector for Lane B regulator/rectifier	912iS Technical Questions	1
Key West Regulator/Rectifier with 912 UL	912 / 914 Technical Questions	5
Regulator/Rectifier	912 / 914 Technical Questions	27
regulator/rectifier	912 / 914 Technical Questions	3
Voltage Regulator/Rectifier - 12V voltage waveform	912 / 914 Technical Questions	1

Top

© Rotax-Owner.com

Login