English French German Italian Portuguese Spanish Swedish

 

Part 2

For those who have decided that they will do a Rotax 5 year rubber replacement we need to look at what it covers and how we can utilize good sterile maintenance practices to keep debris from our hose lines. I will admit that there is more than one way to accomplish this procedure and what will be discussed in this article is, but one way.

The Rotax 5 year rubber replacement covers all fuel, oil and coolant lines. It covers any V-belt, carburetor diaphragm and carburetor rubber intake sockets and any other air intake rubber hose or tubing. With the new maintenance manual just out the fuel pump has been added as a replacement item too. So now you need to decide what brand hose you are going to use. Should it be fuel injection hose or standard carburetor hose? Since we are dealing with a worldwide distribution for engines the hose selection can be vast, but by all means should be thought out. We need to decide what tools we are going to use to cut the hose and how we are going to secure it in place. These again will vary depending on your geographical location.

Monday, 05 March 2012 11:31

Manuals; Do YOU Really Need Them?

Written by

The prudent answer is YES  and absolutely !

At the same time you pick up a screwdriver or wrench and get ready to  perform some work on your trusty Rotax engine, be it a 2 or 4 stroke, you should also be reaching for your engine manual. Let’s face it a manual is as important as your wrench. Your neighbor is not a walking Wikipedia and won’t always provide the correct advice or at least perhaps not in correct sequence.

ROTAX-OWNER.COM will be offline for scheduled maintenance  - for approximately 90 minutes total,

Sometime during the event window of...

June 1st, 2014 5PM to 9PM PST  (starting 8PM Eastern)

(That's June 2nd, 0000-0400 G.M.T.)

Page 14 of 15