fbpx
Login

 

Jump to Forum..

Pulling Gearbox

in 912 / 914 Technical Questions 6 years ago

  • Re: Pulling Gearbox

    by » 6 years ago

    Thanks for the great help. I was looking at the price of Rotax's tool... $522.00!! This will save me quite a bit of money. :-)
      
    Report

  • Re: Pulling Gearbox

    by » 6 years ago

    I think I built this for about $15 - $20 years ago and that included the slide hammer. I got the 1" angle iron at Ace Aviation ( Ace Hardware :)).

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Pulling Gearbox

    by » 6 years ago

    Approx. lengths of the 3 pieces please.
    Thanks Roger.
      
    Report

  • Re: Pulling Gearbox

    by » 6 years ago



    12" each piece. The wide opening towards the rear allows the prop flange to stay clear.
    Puller1.jpg (You do not have access to download this file.)
    Puller.jpg (You do not have access to download this file.)

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

      
    Report

  • Re: Pulling Gearbox

    by » 6 years ago

    Another question.. Mine has a constant speed prop and governor. I will need to disconnect the oil line from the governor to the oil pump. Will I need to pressurize the oil system after reinstalling the line and prop?

    Also, since I'm only doing this to reseal the gearbox, would it be possible to leave the prop attached to the gearbox and pull them both?

    thanks again. John
      
    Report
You do not have permissions to reply to this topic.
Related Topics
Title Category Replies
912 gearbox oil mod 912 / 914 Technical Questions 2
Gearbox inspection at 600hr or 1000hr? 912 / 914 Technical Questions 1
Gearbox Problems 912iS 912iS Technical Questions 22
914 GEARBOX LEAKS 912 / 914 Technical Questions 4
Gearbox 912 / 914 Technical Questions 6
Follow Us

Recent Videos

Safety First!

 

To receive critical-to-safety information on your ROTAX Engine, please subscribe to
ROTAX-OWNER.COM

ROTALK News



ROTALK NEWS Episode 5
Rotax-powered Sling aircraft from The Aircraft Factory, the AVMAP Navigation and engine monitoring system, and the Rotax powered Tucano Experimental and Light-Sport Aircraft.



ROTALK NEWS Episode 4
ROTAX's 915iS-powered Aquila A211 test aircraft, the Scheibe SF-25C Falke (first-ever 912-equipped aircraft!) and ROTAX factory in Gunskirchen, Austria.


ROTALK NEWS Episode 3
Michael Smith's Rotax-Powered Searey Circumnavigation, the amazing Rotax-Powered Lockwood Aircam and Anthony Caere's chimpanzee rescue operations.

Prize Giveaway!


SUBSCRIBE NOW
to automatically enter this years draw!

Login