I am looking to verify carb choke orientation on a rotax 912ul. Per manual it states the L stamp goes to carb for cylinders 1-3 and R goes to 2-4. Would it be safe to say that this statement would be true for a standard setup with intakes installed per factory? And that the l and the r will follow the Carbs only and not the cylinders in a differing configuration?

I have a 912 with the intakes on reversed installation, putting my carb levers to the inside rather than the outside.
  • Re: Carb setup on reversed intake 912ul

    by » 6 years ago

    Is this a KitFox?
    Leave the enricher (choke) setups on their perspective carb. It has nothing to do with which side of the engine the L & R are on, but the individual carb. The book takes into consideration that carbs stay on there correct side and don't get reversed.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell

You do not have permissions to reply to this topic.