Oil Change

by Robert J. Dean in General Tech Discussion 7 years ago

In the middle of an oil change I managed to misplace the drain plug.
So until I find it or order a new one the tank will not have any oil in it.
I have not removed any of the hoses at the top of the tank.
I have not yet changed the oil filter.
Will it be necessary to purge the system?
Thanks
Bob

Re: Oil Change

by Bill Hertzel » 7 years ago

Bill Hertzel

13 1.95k 7.96k

It will not be necessary to do the complete, new engine style purge.
Wait until you can refill the tank before you replace the Oil filter.

The Tank's Oil Drain plug should be a 12mm long, M12x1.75 bolt.
You should be able to find a replacement one at any Auto parts store.
You will need to drill it for the safety wire.

Once refilled and re-filtered, before starting the engine...
Turn the prop CCW by hand until the Oil Filter refills and you see the Oil Pressure gauge move off the Zero peg.
This might take 20-50 turns, be patient.

The Oil hoses should not drain just because the tank is empty.

Bill Hertzel
Rotax 912is
North Ridgeville, OH, USA
Clicking the "Thank You" is Always Appreciated by Everyone.

Thank you said by: Robert J. Dean

Report
Re: Oil Change

by Robert J. Dean » 7 years ago

Robert J. Dean

11 20 0

I finally found the plug.
Thank you for the advice.

Bob

Report

You do not have permissions to reply to this topic.

Title	Category	Replies
Oil Pressure Relief Valve	912 / 914 Technical Questions	1
How to Remove Outlet Line from Turbo Oil Sump	912 / 914 Technical Questions	2
Blended 100LL/Unleaded Fuel & Oil Change Interval	912iS Technical Questions	2
replacing coil HT wire	912 / 914 Technical Questions	1
Ring mount, rad, oil cooler, rectifier	Parts	1

Oil Change

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login