spark woes

by Greg Stephens in General Tech Discussion 7 years ago

I have no spark on my #3 and #4 top plugs removed coil had it tested showed bad so I replaced it with a new one, still no spark on 3 and 4 top checked all connections and wires found no problems checked trigger coil B3/4 which serves top plugs 3 n 4 with ohm meter checked ok gap is good could electric module be going bad ? Have good spark on all other plugs this is a 97 912 ul need help!

Re: spark woes

by Rob Seaton » 7 years ago

Rob Seaton

3 1.32k 240

1- swap the trigger coil 4-pin connectors. if the problem goes to the other side the trigger is the culprit.
2-swap the A module white wire with B module white wire and see if the problem goes to the 3/4 top plugs. if it does the B module has a failure in one circuit.

Report

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
Spark plug thread cleaning	912 / 914 Technical Questions	1
Damaging Spark-Plug Threads on Removal	912iS Technical Questions	8
Replacing dropped spark plug	912iS Technical Questions	4
Spark Plug Equivalent for Rotax #297656	2 Stroke Technical Questions	1
The problem of spark plug combustion	912 / 914 Technical Questions	3

spark woes

Recent Videos

Safety First!

ROTALK News

Prize Giveaway!

Log In/Out

Login